Graco Endura-Flo pump

Graco Endura-Flo pump

The Endura-Flo 4D150 and 4D350 PUMPS ensure long-lasting durability and can withstand runaway conditions better than other diaphragm pumps. This easy-to-install pump offers low pulsation output and smooth changeover for quick color changes, saving you time and money. Plus it has the highest pressure ratio in the industry at 4:1.

Maximum air input pressure – 100 psi

Maximum fluid working pressure – 400 psi

Maximum static fluid pressure – 430 psi

Ratio – 4:1

Maximum recommended continuous cycle rate – 20 cycles per minute

Volume per cycle (double stroke) – 4D150: 150 cc / 4D350: 350cc

Fluid Flow @ 30 CPM – 4D150: 1.20 gpm / 4D350: 2.75

Ambient and operating temperature range. Use dry compressed air when operating at low temperatures – 32 to 122°F

Dry suction lift – 23 ft

Wet suction lift – 29 ft

Air inlet size – 1/4 npt

Fluid inlet size – 1 in. Tri-Clamp Flange, 1/2 in npt, or 1/2 in bspp

Fluid outlet size – 1 in. Tri-Clamp Flange, 1/2 in npt, or 1/2 in. bspp

Wetted parts -SST, perfluoroelastomer (FFKM), PTFE, Polyphenylene Sulfide (PPS)

http://www.graco.com/content/dam/graco/ipd/literature/flyers/345086/345086EN-B.pdf

Dudley C. Jackson, LLC is an authorized distributor for the Graco Endura-Flo pumps.
Please contact us if you would like to learn more about how these pumps can enhance your material supply operation.

Request More Information